A requirement of the cabin initial renovation work was a working kitchen and a way to wash the dishes. After considering the required elements to wash dishes, I found the list was somewhat short:
- Hot water
- Counter to hold the sink
- Sink to hold the faucet and water
- Window to look at Muddy Creek while washing dishes
- Someone to look out the window while washing the dishes
Short list but quite a bit to tackle.
Getting water to the cabin proved a little more difficult that we thought on purchase day. Although the gravity fed spring cistern and tank were full, the original owner’s pump wasn’t in working condition. After some impromtu plumbing lessons that included learning how to use PEX pipe and compression fittings, installing the water pump, draining the tanks under the cabin and hot water tank, and installing a whole house water filter for sediment, the water was FINALLY flowing to the cabin.
Yes, there was a happy dance involved. No, there is no video. The first showers were soooo worth it.
I really, really, really wanted to build my own kitchen cabinets. I had researched plans and how-to for weeks. I have serious crush on Alaskan homemaker Ana White and her community of home how-to builders, plans and terrific projects. Her momplex project with clear and concise kitchen base cabinets empowered me to build my own.
Except we would have had to completely change the plumbing in the cabin to have cabinets. The original owner installed the water pump and hot water tank directly under the kitchen counter.
In the absence of some serious plumbing skills, money, and pure ambition, the plumbing was all staying put. The plans changed to building a counter around the existing plumbing and installing cabinet faces later (god bless the annual tax return).
In true Colvin-builder fashion, a sturdy, level 80″ L-shaped base for the counter was built out of 2″x4″ supports. Most of the redrawing involved designing a support for an apron sink from Ikea plans (see below for sink information and note the implied “Can you believe those are the only instructions that come with Ikea stuff?!” grumble everyone is all too familiar with). With the counter supports in place, Janeé and Biz commented that in case of rapture they were holding on to the counter. There were some other jokes about dirty things…
Hey – get your mind out of the gutter – this all in plans of washing dirty dishes….
The countertop is Ikea’s Varde countertop – a birch butcher block top that comes in two different lengths that may be cut to size. The advantage of this was that we could cut our own countertop to size at a relatively low cast rather than ordering custom countertops. The butcher block birch is typically oiled like most wooden cutting boards. We elected to put several coats of polyurethane on the counter instead for a nice sheen that is easily cleaned after each use. If you elect to use polyurethane, it’s worth the time and effort to lightly sand between a minimum of three coats. The results are a smooth surface that will cause even the most uninterested to rub their had affectionately across the counter and grunt something along the lines of approval.
Sink & Faucet
From the start we wanted a white apron sink with an industrial faucet. The best value we found was Ikea’s Domsjo sink bowl which comes in three shapes and sizes. We considered several faucet models and after many weeks of “which one do you want?” decided on our this is the last time we’re going to Ikea ever stainless steel Hjuvik kitchen faucet with hand spray.
Our countertop is not at average height for most people – it’s at average height for people topping out at six feet tall – and we love it. Measuring at 42″ high, it rests just above the window sill from which the new dishwasher will be able to gaze lovingly down to our favorite trout stream.
We cook – really well. Want to wash our dishes? We’ll feed you.